|
Post by pantheon8 on Jul 27, 2009 4:15:16 GMT
Let's say that after any efforts to provide a stable enviornment for plants to grow, a tiny bit of mold starts to grow. I do not have mold at the moment and have taken measures to try to prevent it (air flow, etc.) but whenever a leaf had died on my previous plants, s white mold would appear. Even if I cut the leaf off mold would start again. I ha e researched how to deal with mold on cps but it's all so different. So I have come here to ask what you growers use? PS I would be using it on pings and droseras if I have to. Thanks!! Pantheon8
|
|
|
Post by peterhewitt on Jul 27, 2009 14:40:52 GMT
The mold could very possibly be due to Humidity being too high, it will keep recurring unless you lower the Humidity. Algaecide and other Chemicals should really only be used as a last resort, and most growers prefer to change environmental parameters to combat mold. as would i. as for which chemicals to use, this will depend on the type of mold and also local availability
|
|
|
Post by ieatflys on Jul 27, 2009 18:42:30 GMT
My humidity in my terrarium is at 90-95 pesent normally and it is doing fine I have had no mold problems just keep as mutch dead plant matter out and you should be fine.
ieatflys
|
|